SAE AMS3645 Polychlorotrifluoroethylene, Compression Molded-Heavy Sections, Unplasticized
时间:2024-05-16 20:15:46 来源: 标准资料网 作者：标准资料网 阅读：9739
Product Code:SAE AMS3645
Title:Polychlorotrifluoroethylene, Compression Molded-Heavy Sections, Unplasticized
Issuing Committee:Ams P Polymeric Materials Committee
Scope:This specification covers polychlorotrifluoroethylene (PCTFE) in the form of sheet over 0.250 in. (6.25 mm) in thickness, rod, heavy wall tubing, and large molded and machined parts. Primarily for parts requiring chemical inertness and toughness up to 200C degrees (390F degrees) or high-frequency electrical insulating properties up to 165C degrees (330F degrees). The material also may be used at cryogenic temperatures.
MIL-PRF-22684F, PERFORMANCE SPECIFICATION, RESISTORS, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR (13 FEB 2006)., This specification covers the general requirements for insulated, film, fixed resistors of 2- and 5-percent resistance tolerance. These resistors are capable of full-load operation at an ambient temperature of 70°C and have a resistance-temperature characteristic of +200 parts per million per degree Celsius (ppm/°C), (see 6.1).Product Code:SAE J1942
Title:Hose and Hose Assemblies for Marine Applications
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope:SAE J1942, developed through the cooperative efforts of the U.S. Coast Guard and SAE, became effective August 28, 1991, as the official document for nonmetallic flexible hose assemblies for commercial marine use.This SAE Standard covers specific requirements for several styles of hose and/or hose assemblies in systems on board commercial vessels inspected and certificated by the U.S. Coast Guard. It is intended that this document establish hose constructions and performance levels that are essential to safe operations in the marine environment. Refer to SAE J1273 for selection, installation, and maintenance of hose and hose assemblies.Refer to SAE J1527 Marine Fuel Hose for hose to convey gasoline or diesel fuel aboard small craft, including pleasure craft and related small commercial craft regulated directly or by reference under 33 CFR 183 Subpart J, and boats and yachts meeting American Boat and Yacht Council standards.SAE J1942-1 -- Qualified Hoses for Marine Applications is a listing of the products which have been certified for use in the applications described in SAE J1942, Table 1 -- HOSE APPLICATION/CONSTRUCTION, for Fluid Power, Fuel Oil, Lube Oil, Water, and Pneumatic systems.SAE J1942-1 is updated yearly and is available from SAE as a single copy document.